XTR Rear Wheel Void Bracket (ASSEMBLED)
Utilise the void of dead space tucked high up behind the rear right hand wheel for maximum protection using our 3mm stainless steel compressor bracket with our stylish XTR logo etched into the bracket.
We have a large variety of kits to suit everyone's different needs! Increase the performance of your air system and combine the compressor with our 4L air tank kit! Our air tank bracket is made from 2mm galvanised steel, powder coated in ripple black with our stylish stainless steel XTR logo attached. The air tank bracket is designed to make installation of an air tank easy while increasing protection of the whole system.
Top off your air system with our coupling relocation bracket increasing accessibility by locating the air outlet coupling strategically at the rear of the vehicle to access both sides of the vehicle and trailer with ease.
Simply install three brackets using existing vehicle holes, connect the air hoses, supply power to the compressor, follow ARBs wiring instructions and job done!
The main reason for having an onboard compressor is allowing the freedom of pumping up your tyres whenever and wherever you like! A couple other uses include using air tools, air lockers, pumping up bike tyres, sports balls, inflatable paddle boards, air mattresses or cleaning the inside of your vehicle.
We haven’t had any compressor failures due to the compressor being mounted outside the vehicle being exposed to the elements with over 3 years of testing!
Key features:
- 100% Australian made.
- Mounted high in the rear wheel void for maximum protection from damage and the elements.
- Compatible with ARB twin or single compressors.
- Utilities all existing bolt holes.
- Use the bracket to mount a range of different accessories.
Our assembled DIY bracket kits include all assembly and installation components for a seamless installation of an ARB twin or single compressor. Our bracket can also be purchased without the compressor if you already have a compressor or you wish to use the bracket to mount different accessories such as a water pump.
Notes:
- This kit suits the Ford Ranger Dual Cab PX 1, 2 and 3 (MY11-MY22). Models XL, XLS, XLT & WILDTRAK'S.
- If you're planning on retrofitting a boxed ARB Twin Compressor (CKMTP12) you will need an additional T-Piece (ARB part number 0740103) due to slight differences with the compressor.
- Only suits the style of ARB 4L air tank pictured, i.e. single weld in the centre, not the new model with welded ends.
Recommendation: If you are unsure which side to buy we would recommend getting the driver's side kit as there are a few less installation steps.
WHAT’S IN THE BOX
Option 1: XTR Compressor Bracket
- XTR bracket compatible with ARB twin or single air compressor (ARB compressor not included)
- Installation bolts
- Detailed installation instructions
- Air coupling not included
Option 2: XTR Compressor Bracket + XTR Air Tank Bracket
- XTR compressor bracket compatible with ARB twin or single air compressor (ARB single or twin compressors not included)
- XTR air tank bracket compatible with ARB 4L air tank (ARB 4L air tank not included)
- Installation bolts, air fittings, air coupling and metal air hose
- Detailed installation instructions
Option 3: XTR Compressor Bracket + XTR Air Tank Bracket + ARB 4L Air Tank
- XTR compressor bracket compatible with ARB twin or single air compressor (ARB single or twin compressors not included)
- XTR air tank bracket
- ARB 4L air tank
- Installation bolts, air fittings, air coupling and metal air hose
- Detailed installation instructions
Option 4: ASSEMBLED XTR Compressor Bracket + ARB Twin Air Compressor
- ASSEMBLED XTR bracket with ARB twin air compressor
- Installation bolts and air coupling
- Original ARB wiring (modification required)
- Detailed installation instructions
Option 5: ASSEMBLED XTR Compressor Bracket + ARB Twin Air Compressor + XTR Air Tank Bracket + ARB 4L Air Tank
- ASSEMBLED XTR bracket with ARB twin air compressor
- XTR 4L air tank bracket
- ARB 4L air tank
- Installation bolts, air fittings, air coupling and metal air hose
- Original ARB wiring (modification required)
- Detailed installation instructions
Option 6: XTR Ultimate Kit
- ASSEMBLED XTR bracket with ARB twin air compressor
- XTR 4L air tank bracket
- ARB 4L air tank
- Revised waterproof Air coupling and switch relocation bracket
- Installation bolts, air fittings, air coupling and metal air hose
- Original ARB wiring (modification required)
- Detailed installation instructions
Option 7: XTR Air Tank Bracket
- XTR 4L air tank bracket (air tank not included)
- Installation bolts
- Detailed installation instructions
Recommended XTR Extra: (suits the genuine ford bumper and tow bar only)
- Air coupling and switch relocation bracket:
- Installation bolts, air fittings, air coupling and metal air hose
- Detailed installation instructions
- Note: included with XTR Ultimate Kit